Kaiyi — 15.4.2 Using CANopen Builder to Configure a Network

Chapter 15 CANopen Communication Module AH10COPM  Setting a node list After users double-click the icon representing the AH10COPM module functioning as a master, the Node List Setting window will appear. In this example, the ASDA-A2 series AC servo drive whose node ID is 3 is selected. After is clicked, node ID 3 will be added to the list under Node List . When node ID 3 on the list under Node List is selected, the data registers in an AH500 series module onto which the I/O data in node ID 3 is mapped are shown in the Output Table section and the Input Table section. 15-17 Transmission Description Remark type immediately after the master station receives it.

RxPDO Same as transmission type 254 Asynchronous TxPDO Same as transmission type 254