Kaiyi — 15.5.5 Obtaining the States of the Slave Stations on a CANopen Network

AH500 Module Manual If a node on the node list in a master station is normal, the bit corresponding to the node will be OFF. If a node on the node list in a master station is abnormal (a node is not initialized successfully, or is offline abnormally), the bit corresponding to the bit will be ON. 15-34 Output pin Name Function Data Output range Update type 16~station address 31 0: Normal 1: Abnormal output pin’s signal from low to high, the value of the Nodes 1 _ output pin is updated. Nodes 2 _ States of station address 32~station address 47 WORD Every bit indicates the state of a station. 0: Normal 1:

Abnormal  When there is a transition in the Done output pin’s signal from low to high, the value of the Nodes 2 _ output pin is updated. Nodes 3 _ States of station address 48~station address 63 WORD Every bit indicates the state of a station. 0: Normal 1: Abnormal  When there is a transition in the Done output pin’s signal from low to high, the value of the Nodes 3 _ output pin is updated. Nodes 4 _ States of station address 64~station address 79 WORD Every bit indicates the state of a station. 0: Normal 1: Abnormal  When there is a transition in the Done output pin’s signal from low to high, the value of the Nodes 4 _ output pin is updated.

Nodes 5 _ States of station address 80~station address 95 WORD Every bit indicates the state of a station. 0: Normal 1: Abnormal  When there is a transition in the Done output pin’s signal from low to high, the value of the Nodes 5 _ output pin is updated. Nodes 6 _ States of station address 96~station address 111 WORD Every bit indicates the state of a station. 0: Normal 1: Abnormal  When there is a transition in the Done output pin’s signal from low to high, the value of the Nodes 6 _ output pin is updated. Nodes 7 _ States of station address 112~station address 127 WORD Every bit indicates the state of a station. 0: Normal 1:

Abnormal  When there is a transition in the Done output pin’s signal from low to high, the value of the Nodes 7 _ output pin is updated.