Chapter 3 Analog Output Module AH04DA/AH08DA External wiring (1) AH04DA-5A/AH08DA-5A AC motor drive , , recorder ... proportioning valve Voltage output -10V~+10V CH0 CH0 VO0 IO0 AG Shielded cable 1 * SLD AG AC motor drive , , recorder ... proportioning valve CH3 Current output 0mA~20mA CH3 Shielded cable 1 * AG *3 SG +15V UP 24VDC DC/DC converter ZP -15V AG *1. Please use a shielded cable as an analog output cable, and isolate the shielded cable from other power cables. *2. If the ripple voltage of the input terminal of the load connected is large, and results in interference with the wiring, please connect a 0.1~0.47 μF and 25 V capacitor. *3.
Please connect the terminal SLD to the terminal SG. Once AH04DA-5A/AH08DA-5A is installed on a on the backplane will be a short circuit. Please connect the terminal on the backplane to the backplane, the connection between the terminal SG on AH04DA-5A/AH08DA-5A and the terminal ground terminal . (2) AH08DA-5B AC motor drive , , recorder ... proportioning valve Voltage output -10V~+10V CH0 CH0 VO0 AG *3 AG AC motor drive , , recorder ... proportioning valve Voltage output SG -10V~+10V CH7 CH7 VO7 AG AG SG *3 *4 SG UP 24VDC DC/DC converter ZP -15V AG +15V *1. Please use a shielded cable as an analog output cable, and isolate the shielded cable from other power cables. *2.
If the ripple voltage of the input terminal of the load connected is large, and results in interference with the wiring, please connect a 0.1~0.47 μF and 25 V capacitor. 3-17 *2 VO3 IO3 AG SLD *2 *2