AH500 Module Manual *3. Please connect the ground in the shielded cable to the terminal SG. *4. Once AH08DA-5B is installed on a backplane, the connection between the terminal SG on AH08DA-5B and the terminal on the backplane will be a short circuit. Please connect the terminal on the backplane to the ground terminal . (3) AH08DA-5C Current output AC motor drive , , recorder ... proportioning valve C H0 0mA~20mA AG IO0 AG CH 0 Shielded cable 1 * *2 SG AC motor drive , , recorder ... proportioning valve Current output CH7 0mA~20mA IO7 CH7 AG AG Shielded cable 1 * *2 SG *3 U P 24VDC DC/DC converter -15V AG +15V *1.
Please use a shielded cable as an analog output cable, and isolate the shielded cable from other power cables. *2. Please connect the ground in the shielded cable to the terminal SG. *3. Once AH08DA-5C is installed on a backplane, the connection between the terminal SG on AH08DA-5C backplane to the ground terminal . and the terminal on the backplane will be a short circuit. Please connect the terminal on the 3.3.4 LED Indicators 3-18 SG ZP Number Name Description Operating status of the module RUN LED 1 ON: The module is running. indicator OFF: The module stops running. Error status of the module ERROR LED ON: A serious error occurs in the module. 2 indicator OFF: The module is normal.
Blink: A slight error occurs in the module.