AH500 Module Manual 16.5 Software AHRTU-ETHN-5A, an AH series EtherNet/IP remote I/O module, can connect AHCPU5x1 series CPU and be connected to the EIP Scanner from other vendors as well. While working as the remote I/O module of AHCPU5x1 series CPU, AHRTU-ETHN-5A should be set by opening EIP Builder software via ISPSoft. When being connected to other-brand Scanner, AHRTU-ETHN-5A should be set by opening EIP Builder software alone and then other-brand software is used for connection with AHRTU-ETHN-5A as the EIP slave. Delta EIP Scanner Y Open ISPSoft HWCONFIG Setups EIP Builder RTU HWCONFIG Download N Open EIP Builder RTU HWCONFIG Software Download to AHRTU Import EDS fi le …
For details on operation, refer to Delta EtherNet/IP Operation Manual. 16.5.1 ISPSoft ISPSoft provides the functions of programming for Delta products, configuration of hardware parameters and network planning. If AHRTU-ETHN-5A is used with Delta EtherNet/IP master together, open ISPSoft first to set the hardware parameters of the EtherNet/IP master and then open EIP Builder to add AHRTU-ETHN-5A to the EtherNet/IP master network and edit the I/O modules connected to AHRTU-ETHN-5A.
Delta EIP Scanner Y HWCONFIG Setups EIP Builder RTU HWCONFIG Download Open ISPSoft 16.5.2 EIP Builder EIP Builder provides the functions of planning the network for Delta EtherNet/IP products and setting the parameters of EtherNet/IP slaves. After building AHRTU-ETHN-5A module in the NetworkView window, create network connection lines by dragging. Double click the module icon to open the RTU HWCONFIG page. After EIP Builder is opened, you need check if the communication interface is the same as that for actual wiring on the setting page since EIP Builder mainly displays communication setting on ISPSoft after EIP Builder is opened every time. 16-12