Kaiyi — 16.5.2 EIP Builder

Chapter 16 Remote I/O Module AHRTU-ETHN-5A Ethernet - Advance The tab provides the setting of AHRTU-ETHN-5A’s advanced Ethernet functions including filter and NTP. Filter_IP address filter setting The above page sets the filter function of network devices. Only the devices of which IP addresses are in the set range are allowed to communicate with AHRTU-ETHN-5A. The packets sent by the devices of which the IP addresses are out of the set range will be discarded. At most 16 groups of IP address ranges can be set. Steps for setting the function: (1) Select “ Enable IP Address Filter ” and then double click one line of the following table to open the IP Address Filter window.

16-15 Name Description IP Addressing Mode Mode of getting IP address  Static: Fixed IP address.  DHCP: DHCP server assigns the dynamic IP address.  BOOTP (default): BOOTP server assigns the dynamic IP address. If DHCP or BOOTP is selected, you can make the setting through IP manager in EIP Builder. IP Address Set an IP address; default: 192.168.1.3. Netmask Address Set the IP address for networkmask; default: 255.255.255.0 Gateway Address Set the IP address for gateway; default: 192.168.1.1 Keep Alive Timer Set the time for keeping connection alive.

If the upper machine does not send the packet to AHRTU-ETHN-5A within the set time, AHRTU-ETHN-5A will automatically cut the connection with it.