AH500 Module Manual (2) Set the range of input addresses in the following window. Note that the start IP address should be less than the end IP address. Click “ OK ” after setting is finished. For instance, after the setting, only the IP address 192.168.1.x (x= 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 ) is allowed to store in AHRTU-ETHN-5A. NTP Client Service Select “ Enable NTP Client Service ” to connect AHRTU-ETHN-5A to NTP server and set the time update cycle. 16-16 Name Description NTP server Set the IP address of the network NTP server. Make sure that the connection to the server is made.
Update Cycle Set the time update cycle for the connection to the NTP server Daylight Saving Set daylight saving time. You can set the start date, end date and time. Time Zone Select a time zone