Mitsubishi — 5.6 Descriptions of the Applied Instructions

AH500 Motion Control Module Manual  D : Device which is rotated; n : Number of bits forming a group  The bits in D are divided into groups ( n bits as a group), and these groups are rotated rightwards.  The n th bit from the right is transmitted to a carry flag.  Generally, the pulse instructions RORP and DRORP are used.  If the operand D is KnM/KnS, Kn in KnM/KnS must be K4 (16 bits) or K8 (32 bits).  16-bit instruction: 1≤ n ≤16; 32-bit instruction: 1≤ n ≤32  SM1066 is the carry flag in an Ox motion subroutine, and SM970 is the carry flag in O100.

Explanation  When X0.0 is turned from OFF to ON, the bits in D10 are divided into groups (four bits as a group), and these groups are rotated rightwards. Example (The bit marked with ※ is transmitted to a carry flag.) X0.0 Rotating the bits in D10 rightwards High byte Low byte Carry flag D10 Rotating the 16 bits in D10 D10 Carry flag Low byte High byte 0 * 5-50 API Instruction code Operand Function Rotating bits rightwards 30 D ROR P D, n Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z D         n   Pulse instruction 16-bit instruction (5 steps) 32-bit instruction (6 steps)    RORP D10 K4 1 1 1 1 0 1 1 0 1 0 0 0 1 0 1 1 0 1 0 1 1 1 1 0 1 1 0 1 0 0