Chapter 5 Applied Instructions D : Device which is rotated; n : Number of bits forming a group The bits in D are divided into groups ( n bits as a group), and these groups are rotated leftwards. The n th bit from the left is transmitted to a carry flag. Generally, the pulse instructions ROLP and DROLP are used. If the operand D is KnM/KnS, Kn in KnM/KnS must be K4 (16 bits) or K8 (32 bits). If KnM/KnS is used, it is suggested that M device numbers/S device numbers should start from a number which is a multiple of 16 in the decimal numeral system, e.g. K4M0 and K4S16 (decimal numeral system). 16-bit instruction: 1≤ n ≤16; 32-bit instruction:
1≤ n ≤32 SM1066 is the carry flag in an Ox motion subroutine, and SM970 is the carry flag in O100. Explanation Example When X0.0 is turned from OFF to ON, the bits in D10 are divided into groups (four bits as a group), and these groups are rotated leftwards.
(The bit marked with ※ is transmitted to a carry flag.) X0.0 Rotating the bits in D10 leftwards High byte Low byte Carry flag D10 Rotating the 16 bits in D10 High byte Low byte Carry flag 1 D10 5-51 API Instruction code Operand Function 31 D ROL P D, n Rotating bits leftwards Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z D n Pulse instruction 16-bit instruction (5 steps) 32-bit instruction (6 steps) ROLP D10 K4 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1