Mitsubishi — 5.6 Descriptions of the Applied Instructions

AH500 Motion Control Module Manual Explanation  D : Device which is rotated; n : Number of bits forming a group  The bits in D are divided into groups ( n bits as a group), and these groups are rotated rightwards with a carry flag.  The n th bit from the right is transmitted to a carry flag.  Generally, the pulse instructions RCRP and DRCRP are used.  If the operand D is KnM/KnS, Kn in KnM/KnS must be K4 (16 bits) or K8 (32 bits).  If KnM/KnS is used, it is suggested that M device numbers/S device numbers should start from a number which is a multiple of 16 in the decimal numeral system, e.g. K4M0 and K4S16 (decimal numeral system).  16-bit instruction: 1≤ n ≤16; 32-bit instruction:

1≤ n ≤32  SM1066 is the carry flag in an Ox motion subroutine, and SM22 is a carry flag.  When X0.0 is turned from OFF to ON, the bits in D10 are divided into groups (four bits as a group), and these groups are rotated rightwards with a carry flag.

(The bit marked with ※ is transmitted to the carry flag.) Example X0.0 Rotating the bits in D10 rightwards D10 High byte Low byte Carry flag Rotating the 16 bits in D10 High byte Low byte D10 0 Carry flag 5-52 API Instruction code Operand Function Rotating bits 32 D RCR P D, n rightwards with a carry flag Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z D         n   Pulse instruction 16-bit instruction (5 steps) 32-bit instruction (6 steps)    RCRP D10 K4 0 0 0 0 1 1 1 1 0 0 0 0 0 1 1 0 1 1 1 0 1 0 0 0 0 1 1 1 1 0 0 0 0