Mitsubishi — 5.6 Descriptions of the Applied Instructions

Chapter 5 Applied Instructions  D : Device which is rotated; n : Number of bits forming a group  The bits in D are divided into groups ( n bits as a group), and these groups are rotated leftwards with a carry flag.  The n th bit from the left is transmitted to a carry flag.  Generally, the pulse instructions RCLP and DRCLP are used.  If the operand D is KnM/KnS, Kn in KnM/KnS must be K4 (16 bits) or K8 (32 bits).  If KnM/KnS is used, it is suggested that M device numbers/S device numbers should start from a number which is a multiple of 16 in the decimal numeral system, e.g. K4M0 and K4S16 (decimal numeral system).  16-bit instruction: 1≤ n ≤16; 32-bit instruction:

1≤ n ≤32  SM1066 is the carry flag in an Ox motion subroutine, and SM22 is a carry flag. Explanation Example  When X0.0 is turned from OFF to ON, the bits in D10 are divided into groups (four bits as a group), and these groups are rotated leftwards with a carry flag.

(The bit marked with ※ is transmitted to the carry flag.) X0.0 Rotating the bits in D10 leftwards High byte Low byte Carry flag D10 Carry flag D10 5-53 API Instruction code Operand Function Rotating bits leftwards with a carry flag 33 D RCL P D, n Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z D         n   Pulse instruction 16-bit instruction (5 steps) 32-bit instruction (6 steps)    RCLP D10 K4 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Rotating the 16 bits in D10 High byte Low byte 1 1 1 1 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 1 1 1