Mitsubishi — 5.6 Descriptions of the Applied Instructions

AH500 Motion Control Module Manual  The instruction ANR is used to reset an annunciator.  If more than one annunciator is ON simultaneously, the annunciator whose number is smallest will be reset.  Generally, the pulse instruction ANRP is used. Explanation Example  If X2.0 and X2.1 are ON for more than 2 seconds, the annunciator S912 will be ON. If X2.0 and D2.1 are turned OFF, S912 will still be ON, T10 will be reset to OFF, and the value of T10 will be 0.  If X2.0 and X2.1 are not ON for 2 seconds, the value of T10 will become 0.  When X0.3 is turned from OFF to ON, the annunciator whose number is smallest in the annunciators which are driven is reset.

 When X0.3 is turned from OFF to ON again, the next annunciator whose number is smallest in the annunciators which are driven is reset. X2.0 X2.1 X0.3 ANRP 5-68 API Instruction code Operand Function Resetting an 47 ANR P – annunciator Pulse instruction 16-bit instruction (1 step) 32-bit instruction   – ANS T10 K20 S912