Chapter 5 Applied Instructions S 1 : Augend; S 2 : Addend; D : Sum The binary floating-point value in S 2 is added to the binary floating-point value in S 1 , and the sum is stored in D . If S 1 is a floating-point value, the instruction will be used to add the binary floating-point value in S 2 to the floating-point value. If S 2 is a floating-point value, the instruction will be used to add the floating-point value to the binary floating-point value in S 1 . S 1 and S 2 can be the same register. If the instruction DEADD is used under the circumstances, the value in the register is added to itself whenever the conditional contact is ON in a scan cycle.
Generally, the pulse instruction DEADDP is used. If the absolute value of an oepration result is greater than the maximum floating-point value available, a carry flag will be ON. If the absolute value of an oepration reuslt is less than the minimum floating-point value available, a borrow flag will be ON. If an operation result is 0, a zero flag will be ON. SM1064 is the zero flag in an Ox motion subroutine, and SM968 is the zero flag in O100. SM1065 is the borrow flag in an Ox motion subroutine, and SM969 is the borrow flag in O100. SM1066 is the carry flag in an Ox motion subroutine, and SM970 is the carry flag in O100.
Explanation When X0.0 is ON, the binary floating-point value in (D3, D2) is added to Example 1 the binary floating-point value in (D1, D0), and the sum is stored in (D11, D10). X0.0 When X0.2 is ON, F1234.0 is added to the binary floating-point value in (D11, D10), and the sum is stored in (D21, D20). Example 2 X0.2 Additional remark Please refer to section 5.3 for more information about performing operations on floating-point numbers.
5-83 API Instruction code Operand Function Binary floating-point 120 D EADD P S , S , D 1 2 addition Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z S 1 S 2 D Pulse instruction 16-bit instruction 32-bit instruction (9 steps ) – .0 DEADD D0 D2 D10 .2 DEADD D10 F1234.0 D20