Mitsubishi — 5.6 Descriptions of the Applied Instructions

AH500 Motion Control Module Manual  S 1 : Minuend; S 2 : Subtrahend; D : Difference  The binary floating-point value in S 2 is subtracted from the binary floating-point value in S 1 , and the difference is stored in D .  If S 1 is a floating-point value, the instruction will be used to subtract the binary floating-point value in S 2 from the floating-point value. If S 2 is a floating-point value, the instruction will be used to subtract the floating-point value from the binary floating-point value in S 1 .  S 1 and S 2 can be the same register.

If the instruction DESUB is used under the circumstances, the value in the register is subtracted from itself whenever the conditional contact is ON in a scan cycle. Generally, the pulse instruction DESUBP is used.  If the absolute value of an oepration result is greater than the maximum floating-point value available, a carry flag will be ON.  If the absolute value of an oepration reuslt is less than the minimum floating-point value available, a borrow flag will be ON.  If an operation result is 0, a zero flag will be ON.  SM1064 is the zero flag in an Ox motion subroutine, and SM968 is the zero flag in O100.

 SM1065 is the borrow flag in an Ox motion subroutine, and SM969 is the borrow flag in O100.  SM1066 is the carry flag in an Ox motion subroutine, and SM970 is the carry flag in O100. Explanation  When X0.0 is ON, the binary floating-point value in (D3, D2) is Example 1 subtracted from the binary floating-point value in (D1, D0), and the difference is stored in (D11, D10). X0.0 Example 2  When X0.2 is ON, the binary floating-point value in (D1, D0) is subtracted from F1234.0, and the difference is stored in (D11, D10).  Please refer to section 5.3 for more information about performing Additional remark operations on floating-point numbers.

5-84 API Instruction code Operand Function Binary floating-point 121 D ESUB P S , S , D 1 2 subtraction Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z S 1    S 2    D   Pulse instruction 16-bit instruction 32-bit instruction (9 steps)  –  DESUB D0 D2 D10 0.2 DESUB F1234.0 D0 D10