AH500 Motion Control Module Manual Explanation S : Source device; D : Device in which an operation result is stored The natural logarithm of the value in S is calculated Ln[ S +1, S ]=[ D +1, D ] The value in S can only be a positive value. D must be a 32-bit register, and the value in S must be a floating-point value. If the value in S is not a positive value, an operation error will occur, the instruciton will not be executed, an operation error flag will be ON, and the error code 16#0E19 will appear. e D = S .→The value in D =ln S ( S :
Source device) If the absolute value of an oepration result is greater than the maximum floating-point value available, a carry flag will be ON. If the absolute value of an oepration reuslt is less than the minimum floating-point value available, a borrow flag will be ON. If an operation result is 0, a zero flag will be ON. SM1064 is the zero flag in an Ox motion subroutine, and SM968 is the zero flag in O100. SM1065 is the borrow flag in an Ox motion subroutine, and SM969 is the borrow flag in O100. SM1066 is the carry flag in an Ox motion subroutine, and SM970 is the carry flag in O100.
SM1049 is the operation error flag in an Ox motion subroutine, and SM953 is the operation error flag in O100. When M0 is ON, the value in (D1, D0) is converted into a binary floating-point value, and the conversion result is stored in (D11, D10). When M1 is ON, the natural logarithm of the floating-point value in (D11, D10) is calculated, and the operation result is stored in (D21, D20). Example Additional remark Please refer to section 5.3 for more information about performing operations on floating-point numbers.
5-88 API Instruction code Operand Function Natural logarithm of a 125 D LN P S, D binary floating-point number Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z S D Pulse instruction 16-bit instruction 32-bit instruction (6 steps) – DFLT D0 D10 M DLN D10 D20