AH500 Motion Control Module Manual 5.10.4 Relative Two-speed Motion 1. Motion control function block The motion control function block T_RelSeg2 is used to start relative two-speed motion. The value of the Axis input pin indicates an axis number, and the value of the Velocity1 input pin indicates the speed of the first motion. The value of the Distance1 input pin indicates the distance for which the first motion moves, and the distance is a relative distance. The value of the Velocity2 input pin indicates the speed of the second motion. The value of the Distance2 input pin indicates the distance for which the second motion moves, and the distance is a relative distance. 2.
Input pins/Output pins 5-150 Input pin Name Function Data Setting value Time when a value is valid type Axis Motion axis number WORD K1~K16 The value of the Axis input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Execute Motion is started when there is a transition in the Execute input pin’s signal from low to high. BOOL True/False - Distance1 Relative distance for which the first motion moves DWORD K-2,147,483,646~ K2,147,483,646 The value of the Distance1 input pin is valid when there is a transition in the Execute input pin’s signal from low to high.
Velocity1 Target speed of the first motion DWORD K1~K2,147,483,647 The value of the Velocity1 input pin is valid when there is a transition in the Execute input pin’s signal from low to high.