Chapter 5 Applied Instructions After the first G-code motion is complete, the second G-code motion will be executed. Steps: (a) Set Execute1 to True. (b) Wait for a transition in Done2’s signal from low to high or a transition in Error2’s signal from low to high. The second G-code motion is executed before the execution of the first G-code motion is complete. Steps: (a) Set Execute1 to True. (b) Set Test to ON when Busy1 is set to True. (c) Wait for a transition in Done2’s signal from low to high or a transition in Error2’s signal from low to high. Timing diagram:
Number1 = Number2 The second motion The second motion can not First Execute1 1 0 t Busy1 0 1 t Done1 1 Second 0 t Test 1 Execute2 0 1 t 0 t Busy2 1 0 t Done2 1 t Error2 1 0 5. Modules which are supported 0 t The motion control function block T_GcodeRun supports AH05PM-5A, AH10PM-5A, AH15PM-5A, and AH20MC-5A. 5-209