AH500 Motion Control Module Manual 5.13.6 Setting High-speed Comparison 1. Motion control function block The motion control function block T_Compare is used to start high-speed comparison. The value of the Channel input pin indicates a comparator number, the value of the Source input pin indicates a source, the value of the CmpMode input pin indicates a comparison condition, and the value of the OutputDevice indicates an output device. 2.
Input pins/Output pins 5-248 Input pin Name Function Data Setting value Time when a value is valid type Channel Comparator number WORD 0~7 The value of the Channel input pin is valid when there is a transition in the Enable input pin’s signal from low to high. Enable The motion control function block is enabled when there is a transition in the Enable input pin’s signal from low to high. BOOL True/False -