Mitsubishi — 8.3.1.1 Function Relates the Positions of a Master Axis to the Positions of a Slave Axis

AH500 Motion Control Module Manual The CAM Chart-0 window is shown below.      Displacement: The relation between the master axis and the slave axis is described in terms of displacement.  Velocity: The relation between the master axis and the slave axis is described in terms of speed.  Acceleration: The relation between the master axis and the slave axis is described in terms of acceleration.  Data setting area:  Resolution : Users can set the number of data points required in the electronic cam chart. The number of data points must be in the range of 10 to 2046.  Velocity : The maximum speed of the slave axis and the minimum speed of the slave axis are shown in this section.

They are calculated by the system according to the data related to displacement. Users can change the maximum speed of the slave axis and the minimum speed of the slave axis by themselves.  Acc : The maximum acceleration of the slave axis and the minimum acceleration of the slave axis are shown in this section. They are calculated by the system according to the data related to displacement. Users can change the maximum acceleration of the slave axis and the minimum acceleration of the slave axis by themselves.  Data Setting … : The description of the relation between the master axis and the slave axis in terms of displacement is shown in the Data Setting window.

The displacement resolution set in the data setting area will be brought into the 8-12