Chapter 8 Electronic Cam 8-23 Input pin Name Function Data Setting value Description type Execute The creation of a rotary cut curve is enabled when there is a transition in the Execute input pin’s signal from low to high.
BOOL True/False Starting the creation of a rotary cut curve MLength Distance for which the master axis specified moves DWORD K1~K2,147,483,647 Distance for which the master axis specified moves (PPS) SLength Distance for which the slave axis specified moves DWORD K1~K2,147,483,647 Distance for which the slave axis specified moves (PPS) SSyncLength Distance for which slave the slave axis specified is synchronized with the master axis specified DWORD K1~K2,147,483,647 Distance for which the slave axis specified is synchronized with the master axis specified (PPS) SSyncRatio Synchronization ratio of the speed of the slave axis specified to the speed of the master axis specified FLOAT 1.1755x10-38~ 3.4028x10+38 Synchronization ratio of the speed of the slave axis specified to the speed of the master axis specified (Speed of the slave axis specified/Speed of the master axis specified) SMaxRatio Maximum ratio of the speed of the slave axis specified to the speed of the master axis specified FLOAT 1.1755x10-38~ 3.4028x10+38 Maximum ratio of the speed of the slave axis specified to the speed of the master axis specified AccCurve Acceleration curve WORD 0~3 (*1) Acceleration curve eCamCurve Cam curve WORD 0~5 (*2) Rotary cut curve Concatenate Concatenation BOOL True/False Connecting to the preceding cam curve State output pin Name Function Data Output range Description type Done The execution of the motion control function block is complete.
BOOL True/False The creation of a curve is complete.