Mitsubishi — 8.4.2 Function Block—T_CamCurve

AH500 Motion Control Module Manual 8.4.2 Function Block—T_CamCurve 1. Creating a cam chart: Users have to create a blank cam chart in PMSoft, and then set resolution in accordance with the number of rotary cut curves. In order to create a rotary cut curve, the users need to type 300 in the Resolution box. Download the cam chart to an AH500 series motion control module. When the AH500 series motion control module operates, electronic cam data is stored in the cam chart. 2. Setting the motion control function block T_CamCurve:

Users have to set the parameters related to a rotary cutter, including the distance for which the master axis specified moves, the distance for which the slave axis specified is synchronized with the master axis specified, and the synchronization ratio of the speed of the slave axis specified to the speed of the master axis specified. After the motion control function block T_CamCurve is executed, a rotary cut curve will be created. 8-22 Input pin Name Function Data Setting value Description type Axis Motion axis number WORD 1~16 Slave axis number