Mitsubishi — 8.4.4 Example

AH500 Motion Control Module Manual 8.4.4 Example 【 Example 】 Number of pulses it takes for the slave axis to rotate once Circumference of the slave axis Unit: mm The slave axis cuts. Initial position 100 Synchronization zone Number of pulses it takes for the master axis to rotate once Circumference of the master axis Unit: mm In a basic framework to which rotary cut is applied, the first axis is a slave axis, and the second axis is a master axis. 1. Using the motion control function block T_CamCurve to automatically create a cam curve 2.

The electronic gear ratio for the cutting roller used is 10,000 pulses per revolution, and the electronic gear ratio for the feeding roller used is 10,000 pulses per revolution. 3. Related parameters 【 Control requirement 】 8-28 Input pin Name Function Data type Setting value Description Axis Motion axis number WORD 1~16 Slave axis number Execute When there is a transition in the Execute input pin’s signal from low to high, the update of a cam curve is enabled. BOOL True/False Starting the update of a cam curve State output pin Name Function Data type Output range Description Done The update of a cam curve is complete. BOOL True/False The update of a cam curve is complete.

Busy The motion control function block is being executed. BOOL True/False A cam curve is being updated. Error An error occurs in the motion control function block. BOOL True/False An error occurs when a cam curve is updated.