Chapter 8 Electronic Cam The length of a cutting is 500 mm. The circumference of the cutting roller used is 60 π mm. The circumference of the feeding roller used is 100 π mm. The speed of the feeding roller used is 1,000 Hz. 4. Motion axes First axis: Slave axis Second axis: Master axis 5. Function blocks Calculating a synchronization ratio The motion control function block is used to calculate the value of the SyncRatio input pin when a cam curve is created.
Automatically creating a cam curve Creating a cam curve Electronic cam motion Starting/Stopping electronic cam motion 【 Elements 】 8-29 Name Motion control function block Function Device in a PLC Description Contacts in PMSoft M0 Calculating a synchronization ratio M10 Starting the creation of a rotary cut curve M50 The creation of a rotary cut curve is complete. M70 Starting/Stopping electronic cam motion M72 Not meshing with the master axis specified M200 Electronic cam motion started