Chapter 9 Multiaxial Interpolation The path of circular interpolation can be a 360° arc. The path of helical interpolation which is viewed from the top can be a full circle. Example 1 Absolute coordinates are set, and a clockwise circular interpolation instruction is used. The arc start point set is (0, 0), the arc end point set is (5000, 5000), and the vector from the arc start point to the arc center point set is (2500, 2500). The output speed set is 2000 Hz. Y-axis Speed: 2 kHz End point (Absolute position): (5000, 5000) 5000 Center point 0 2500 Start point (Present position): (0, 0) Program: G90; G02 X50.0 Y50.00 I2500 J2.5 F2000; -5000 -5000 0 5000 X-axis 9-13 NO.
G-code Combination of operands G17 G18 G19 59 G02/G03 X P Y P Z P K P 1 2 3 6 60 X P Y P Z P K P F V 1 2 3 6 61 X P Y P Z P I P K P 1 2 3 3 6 62 X P Y P Z P I P K P F V 1 2 3 3 6 63 Y P K P 2 6 64 Y P K P F V 2 6 65 Y P J P K P 2 4 6 66 Y P J P K P F V 2 4 6 67 Z P J P 3 4 68 Z P J P F V 3 4 69 Z P J P K P 3 4 6 70 Z P J P K P F V 3 4 6 71 Y P Z P J P K P 2 3 4 6 72 Y P Z P J P K P F V 2 3 4 6 73 X P Y P J P K P 1 2 4 6 74 X P Y P J P K P F V 1 2 4 6 75 X P Z P J P K P 1 3 4 6 76 X P Z P J P K P F V 1 3 4 6 77 X P Y P Z P J P K P 1 2 3 4 6 78 X P Y P Z P J P K P F V 1 2 3 4 6