Chapter 9 Multiaxial Interpolation 0090 0091 Description: G90: Positioning defined with reference to part zero If the target position of an axis is greater than its present position, the motor for the axis will rotate clockwise. If the target position of an axis is less than its present position, the motor for the axis will rotate counterclockwise. G91: Positioning defined with reference to the present position of an axis If the relative target position of an axis is a positive value, the motor for the axis will rotate clockwise. If the relative target position of an axis is a negative value, the motor for the axis will rotate counterclockwise.
I, J, K, and R indicate incremental positions. They are not affected by G60 and G91. 9-21 Instruction code Operand Function G90 None Absolute programming G91 None Incremental programming