Mitsubishi — 9.4 Descriptions of G-code Instructions

AH500 Motion Control Module Manual 0017 0018 0019 Description:  Users can select a plane for circular/helical interpolation by means of G17, G18, or G19. The three G-codes do not have any effect on linear interpolation.  When a program is executed, the three planes available can be switched. If users do not specify a plane, an XY plane will be selected (G17) by the system used.  Three planes Z-axis G19 G18 Y-axis G17 X-axis 9-20 Instruction code Operand Function G17 None XY plane selection G18 None XZ plane selection G19 None YZ plane selection