Mitsubishi — 9.6 Description of TO

AH500 Motion Control Module Manual Note 1: Note 2: Note 3: Users can judge whether interpolation is complete by means of the motion flag SR1048+100*N. 9-26 Motor unit Compound unit Mechanical unit pulse µm Position pulse mdeg pulse 10-4 inches pulse/second centimeter/minute Speed pulse/second 10 degrees/minute pulse/second inch/minute b5 b4 Output type (positive logic) Description 0 0 FP Clockwise pulses RP Counterclockwise pulses Counting up/down 0 1 FP Pulses Clockwise Counterclockwise RP Directions Pulses+Directions 1 0 FP A-phase pulses RP B-phase pulses Clockwise Counterclockwise A/B-phase pulses 1 1 Four times the frequency of A/B-phase pulses bit# Description 12 Bit 12=0:

Absolute coordinates Bit 12=1: Relative coordinates 14 Bit 14=0: Trapezoid curve Bit 14=1: S curve