AH500 Motion Control Module Manual Control/Reading (1) The format of a control register in a high-speed capture mode is described below. The value captured is stored in data registers, and is a 32-bit value. Users can write an initial value into the data registers. After an input terminal is set to ON, the value captured will be updated.
11-10 Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Item Trigger Setting Capture source Item Bit Value AH20MC-5A AH10PM-5A/ AH05PM-5A AH15PM-5A Capture source [3-0] 0 Present position of the 1st axis Present position of the 1st axis Present position of the 1st axis 1 Present position of the 2nd axis Present position of the 2nd axis Present position of the 2nd axis 2 Present position of the 3rd axis Present position of the 3rd axis Present position of the 3rd axis 3 Present position of the 4th axis Present position of the 4th axis Present position of the 4th axis 4 Value in C200 Value in C200 Value in C200 5 Value in C204 Value in C204 - 6 Value in C208 Value in C208 - 7 Value in C212 Value in C212 - Setting [5-4] 0 Capture mode External trigger [15-12] 0 X0.0 X0.0 X0.0 1 X0.1 X0.1 X0.1 2 X0.2 X0.2 - 3 X0.3 X0.3 - 4 - - - 5 - - - 6 - - - 7 - - - 8 X0.8 X0.8 X0.8 9 X0.9 X0.9 X0.9 10 X0.10 X0.10 - 11 X0.11 X0.11 - 12 X0.12 X0.12 X0.12 13 X0.13 X0.13 X0.13 14 X0.14 X0.14 - 15 X0.15 X0.15 -