Mitsubishi — 13.4 Device Backup and Restoration

AH500 Motion Control Module Manual 13.3 Reading and Executing G-codes The regular storage path for NC files is under the root directory \AHMotion\Gcode\ of a memory card. The files are named 100~199 with a sub-name of NC (regardless of capitalization). Format of the files is the same as text files. Each folder contains up to 100 G code files ready for use. The 100 files stand for motion subroutines Ox100~199 (subsequent to the built-in subroutines Ox0~Ox99). The file name 100 refers to Ox100, the file name 101 refer to Ox101, and so forth. So the file name 199 refers to Ox199.

As shown in the figure below, when Ox100 is executed, the AH500 series motion control module will first open and access the file \AHMotion\Gcode\1.NC and then proceed with code transfer and processing. X0.0 13.4 Device Backup and Restoration An AH500 series motion control module provides the use of a memory card as the external storage space for device backup and restoration. 13-4 MOV H8064 SR1052 MOV H1000 SR1030