Mitsubishi — 14.3 Parameters

Chapter 14 DMCNET  SR1073, SR1173, SR1273, SR1373, SR1473, SR1573, SR1673, SR1773, SR1873, SR1973, SR2073, SR2173, SR2273, SR2373, SR2473, SR2573: Status of the servo drive for the axis specified on a DMCNET [Description] Usage of the registers:  If the status of a servo drive is that the servo drive is disconnected, the servo drive is not connected. If a servo drive is actually connected, but its status is that it is disconnected, it may be because the module used can not make sure of the status of the servo drive, and users can reset the servo drive. 1. Instruct the servo drive used to reset NMT. 2.

After the servo drive used is instructed to reset DMCNET communication, the status of the servo drive used will be that the servo drive is OFF.  The command sent to a servo drive determines whether the status of the servo drive is that the servo drive is ON/OFF.  Bit 4 in SR1073 (SR1173, SR1273, SR1373…) is an error flag. If bit 4 in SR1073 (SR1173, SR1273, SR1373…) is set to 1, users can reset it by means of a command.  After the value of bit 11~bit 8 in SR1072 (SR1172, SR1272, SR1372…) becomes 1/2/3/4/5, the status of the command sent to the servo drive used will be indicated by bit 11~bit 8 in SR1073 (SR1173, SR1273, SR1373…).

14-5 1st axis 2nd axis 3rd axis 4th axis HW LW HW LW HW LW HW LW - SR1073 - SR1173 - SR1273 - SR1373 5th axis 6th axis 7th axis 8th axis HW LW HW LW HW LW HW LW - SR1473 - SR1573 - SR1673 - SR1773 9th axis 10th axis 11th axis 12th axis HW LW HW LW HW LW HW LW - SR1873 - SR1973 - SR2073 - SR2173 13th axis 14th axis 15th axis 16th axis HW LW HW LW HW LW HW LW - SR2273 - SR2373 - SR2473 - SR2573 Value Status of the servo drive for the Value Status of the servo drive for the (Hex) axis specified on a DMCNET (Hex) axis specified on a DMCNET The servo drive used is disconnected. A control command is done. xxx0 x0xx xxx1 The servo drive used is OFF. x1xx A control command is running.

xxx2 The servo drive used is ON. x2xx Control command error An error occurs in the servo drive used. xx1x