Chapter 2 Specifications and System Configuratio n 2.9.2 Profiles AHRTU-DNET-5A 1. Profile 5 11 2. Address knob s It is used to set the node address of AHRTU-DNET-5A on a DeviceNet network. (Node addresses range from 0 to 63.) Example: If users want to set the communication address of AHRTU-DNET-5A to 26, they can turn the knob corresponding to x10 1 to 2, and turn the knob corresponding to x10 0 to 6. Points for attention: When the power supply is cut off, the node address is set. After the setting of the node address is complete, AHRTU-DNET-5A can be supplied with power. If AHRTU-DNET-5A is running, changing the node address is unavailable.
Please use a slotted screwdriver to turn the knobs with care, and do not scrape them. 2-100 1 2 3 N 4 6 7 x101 ode Address x100 DR 1 DR 0 IN 1 IN 0 8 10 9 Number Name Description 1 Mod el name Model name of the module 2 Seve n-segment display Display 3 Addr ess knob Setting the address 4 Func tion switch Setting the functions 5 Devi ceNet connector DeviceNet is used to interconnect control devices for data exchange. 6 MS L ED indicator Indicating the status of the module 7 NS L ED indicator Indicating the status of the network 8 Labe l Nameplate 9 Set s crew Fixing the module 10 Conn ector Connecting the module and a backplane 11 Proj ection Fixing the module Setti ng Description 0…
Available nodes on a DeviceNet 63 network 64… Unavailable nodes on a DeviceNet 99 network