AH500 Operation Manual 3. Function switch The function switch provides the following functions: Setting the working mode (IN 0) Setting the transmission speed of a DeviceNet network (DR 0~DR 1) Points for attention: When the power supply is cut off, the functions are set. After the setting of the functions is complete, AHRTU-DNET-5A can be supplied with power. If AHRTU-DNET-5A is running, changing the functions is unavailable. Please use a slotted screwdriver to adjust the DIP switch with care, and do not scrape them. 4. DeviceNet connector AHRTU-PFBS-5A 1. Profile 7 8 9 1. Model name 2. Seven-segment display 3. Address knobs 4. PROFIBUS-DP port 5. RUN LED indicator 6.
NET LED indicator 7. Set screw 8. Label 9. Projection 2-101 DR 1 DR 0 Transmission speed OFF OFF OFF ON 125 kbps 250 kbps ON ON OFF ON E 500 kbps xtended transmission speed IN 1 Reserved Clearing the data in the internal ON storage in AHRTU-DNET-5A IN 0 OFF N o action Pin Signal Color Description 1 V+ Red 24 V DC 2 CAN H _ White Signal (positive pole) 3 SHIELD - It is connected to a shielded cable. 4 CAN L _ Blue Signal (negative pole) 5 V- Black 0 V DC 1 2 3 N 4 5 6 x161 x160 ode Address