Chapter 2 Specifications and System Configuratio n 8 8 9 10 Profile of the extension backplane AHBP08E1-5A 2 4 5 6 1 1 2-112 Number Name Description 1 Mounting hole Fixing the backplane 2 Extension port It is connected to an inferior backplane. 3 Mounting hole After a module is installed, it is fixed by a screw. 4 Connector Connecting the backplane and a power supply module 5 Connector Connecting the backplane and a CPU module 6 Connector Connecting the backplane and an input/output module 7 Hole The projection under a module is inserted into this hole. 8 Mounting clip Hanging a backplane on a DIN rail 9 Mounting hole After a mounting clip is installed, it is fixed by screws.
10 Locating hole A mounting clip is pressed into these locating holes. 8 7