AH500 Operation Manual 8 8 9 10 Extension cable 2 1 2-113 Number Name Description 1 Mounting hole Fixing the backplane 2 Extension port 1 It is connected to a superior backplane. 3 Extension port 2 It is connected to an inferior backplane. 4 Connector Connecting the backplane and a power supply module 5 Connector Connecting the backplane and an input/output module 6 Mounting hole After a module is installed, it is fixed by a screw. 7 Hole The projection under a module is inserted into this hole. 8 Mounting clip Hanging a backplane on a DIN rail 9 Mounting hole After a mounting clip is installed, it is fixed by screws. 10 Locating hole A mounting clip is pressed into these locating holes.
Number Name Description Co 1. nnecting backplanes AHACAB06-5A 1 Connector 2. AHACAB10-5A 3. 4. AHACAB15-5A AHACAB30-5A 2 Clip Fix ing the connector