AH500 Operation Manual *. The device monitoring function can be enabled independently. However, if the program monitoring function is enabled, the device monitoring function is also enabled. on the toolbar, the online monitoring function will be enabled. The system will also enable the device monitoring mode and the program monitoring mode. After users click Online Mode on the PLC menu, or In the online monitoring mode, users can view the present scan time, the communication status, and the status of the PLC in the status bar in ISPSoft. Besides, the present statuses of the devices will be displayed in the original program editing window after the program monitoring function is enabled.
Users can change the operating status of a PLC by the RUN/STOP switch on the PLC. They can also change the operating status of the PLC through the functions provided by ISPSoft. After users click Run on the PLC menu or on the toolbar, the PLC will begin to run. The PLC will stop running after Stop on the PLC menu or on the toolbar is clicked. In the online monitoring mode, users can select a device, right-click the device, and click an item on the context 6-28 Monitoring mode Description Program monitoring mode In this mode, the operating status of the program is displayed in the program editing window. As a result, the present program in ISPSoft must be the same as the program in the PLC.