AH500 Operation Manual Type a table name in the Add Monitor Table window, and then click OK . An item will be under Device Monitor Table in the project management area. If users want to open the monitoring table, they can double-click the item. Besides, the users can create several monitoring tables in the project, and the monitoring tables created will be saved with the project. After the item is double-clicked, a window will appear. The users can add items which will be monitored to the window.
If the users want to add an item to the window, they have to double-click the blank in the monitoring table, or type a device name directly, and type a start address and the number of devices which will be monitored in the Device Monitor Input window. Please notice that 100 items at most can be added to a monitoring table. The users can press Insert on the keyboard to switch between inserting an item in the monitoring table and replacing an item in the monitoring table. The mode which is selected is displayed in the status bar in ISPSoft. If the insertion mode is selected, the item added will be above the item selected in the monitoring table.
If the replacement mode is selected, the item added will overwrite the item selected in the monitoring table. 6-32