Delta Electronics AH500 — 6.6.3 Connection Test

Chapter 6 Writing a Program If an output contact in the program is forced ON or OFF, the output state of this contact will not be affected by the program execution result. *. If the online monitoring function is disabled, the contacts will not be automatically released from the locked states. complete. There are two ways to create a monitoring table. Users can create a monitoring table online or offline.  Method 1 Click New Devices Table on the PLC menu, or As a result, users have to check whether the contacts need to be released from the locked states after the test is on the toolbar.

 Method 2 Right-click Device Monitoring Table in the project management area, point to Device Monitor on the context menu, and click Add . 6-31 Force Description Off (X/Y) Forcing the input contact or output contact selected OFF Release (X/Y) Releasing the contact from the locked state Release All Releasing all the contacts from the locked states