Delta Electronics AH500 — 7.4.1 Initializing a Memory Card

AH500 Operation Manual 7.3.2 Installing a Memory Car d Insert a memory card into the SD slot in a CPU module, and push it downward until it clicks. After the memory card is installed, it is fixed firmly in the slot. If the memory card is loose, it is not installed correctly. Besides, the memory card has anti-misinsertion design. If it is inserted in the wrong direction, it can not be pushed downward. To prevent the CPU module from being damaged, users can not force the memory card in. The correct way to insert the memory card is shown below. 7.3.3 Removing a Memory Card After a memory card is pushed downward, it springs from the slot, and users can take it out.

7.4 Contents of a Memory Card 7.4.1 Initializing a Memory Card Whenever an SD card is inserted into a CPU module which is supplied with power, or power is supplied to a CPU module into which an SD card has been inserted, the system initializes the SD card, and a default folder created in the SD card is named according to the model of the CPU module. During the initialization of a SD card, if a folder is missing from the default folder group, the system automatically adds the lost folder. However, if the initialization of a SD card fails, the SD card can not be initialized again until it is formatted again. When a memory card is initialized, the SYSTEM LED indicator blinks. 7-6