Delta Electronics AH500 — 7.5.1 Backing up the System

Chapter 7 Memory Card 7.4.2 Folder Structure in a Memory Card The default folder group created by an AH system is shown below. The folder name is AH500. Several subfolders are contained inside the AH500 folder. Related files created by users and the AH system are stored in the subfolders. SD Card Root PLC CARD AH500 Firmware Log SysDup DevMem Setup UserProg 7.5 Reading/Writing a Memory Card Users can read/write data into/from a memory card to back up and update a system by means of the DIP switch on a CPU module.

7.5.1 Backing up the System When a system backup is executed, the user program, the parameter setting, the hardware configuration, the network configuration, and the values on the device memories in a CPU module are backed up and saved as a file called AUTOEXEC.dup, which is stored in a folder named SysDup in a memory card. If a default path denotes an existing backup file, the previous data in the old backup file is overwritten when a system is backed up.

7-7 Folder Description Firmware Used for storing firmware files (.mot), (.bin) Log Used for storing Log files (.log) SysDup Used for storing backup files (.dup) UserProg Used for storing device memory files (.txt, .dmd, .csv) DevMem, Setup Reserved for the system