Delta Electronics AH500 — 8.2.5.4 Ethernet─Advance: Email Trigger

Chapter 8 Hardware Configuration  Word Value Change If the value in a device specified meets a condition set, the sending of an email will be triggered. For example, if the value in D0 is larger than 10, the condition of triggering the sending of an email will be met. If users want to set a condition, they can double-click the table under the option button to open the Trigger Mode window.  Device : Users can select a device type in the Device drop-down list box.  Number : Users can type a device address in the Number box.  State & Value : Users can set s condition of triggering the sending of an email here.

(3) Select the User Message box or the Error Log box in the Email Content section. If a user-define message is the text of an email, the User Message box is selected. If an error log in the CPU module is the text of an email, the Error Log box is selected. Only English letters, numerical digits, and special marks can be typed in the box under the User Message box. (4) Select the None option button, the File option button, or the PLC Device option button in the Attachment section. If users want to set an attachment, they have to make sure of the maximum size of an email which the CPU module allows. Please refer to operation manuals for more information.

 None If this option button is selected, no attachment will be inserted.  File Users can select an error log in the memory card, or the system backup file in the memory card as the attachment of the email. 8-44