Chapter 8 Hardware Configuration positions are gray. For example, if the condition represented by trigger 1 or the condition represented by trigger 4 is met, the system will automatically send the emails to user_1@delta.com.tw . If the condition represented by trigger 2 or the condition represented by trigger 5 is met, the system will automatically send the email to user_2@delta.com.tw . If the condition represented by trigger 1 is met, the system will automatically send the email to user_1@delta.com.tw , and user_4@delta.com.tw . *. The parameters set in HWCONFIG must be downloaded to the CPU module so that they can take effect.
(Please refer to section 8.2.6 or section 8.4.4 for more information.) 8.2.5.6 Ethernet ─ Advance: Socket After users click the Ethernet─Advance tab at the top of the window, and the Socket tab at the bottom of the window, they can set the parameters for sockets through which data is transmitted. This function has to be used with specific applied instructions. Please refer to AH500 Programming Manual for more information. Sockets will not be introduced here. Please refer to related documents or manuals for more information about sockets. 8-46