Chapter 8 Hardware Configuration 8.3.3 Exporting and Importing the Parameters in a Module After Export File in the Parameter Setting window is clicked, the parameters in the module will be saved as a CSV file. A file which was exported previously can also be imported. Exporting the parameters in a module Click Export File in the Parameter Setting window, select a folder in the Save in drop-down list box in the Save As window, type a filename in the File name box, and click Save . Importing the parameters in a module Click Import File in the Parameter Setting window, select a file which will be imported in the Save As window, and click Open .
Before the parameters are imported, the system will check the file format and the module model. If the file format or the module model is not correct, the system will forbid the import of the parameters. If the data registers specified in the original file exported have been used in the present configuration, different data registers will be specified in the file after the file is imported. 8-56