Delta Electronics AH500 — 8.4.6.1 Online Mode

Chapter 8 Hardware Configuration 8.4.6.1 Online Mode (1) After users click Online Mode on the Option menu, or on the toolbar, the hardware configuration will be in the online mode. If the users click again, the hardware configuration will not be in the online mode. (2) Before the hardware configuration enters the online mode, the system checks whether the hardware configuration stored in the CPU module is the same as the hardware configuration in the system configuration area. If the hardware configuration stored in the CPU module is different from the hardware configuration in the system configuration area, the system will ask users to download the hardware configuration again.

(3) After the hardware configuration enters the online mode, the statuses of the modules displayed in the system configuration area will vary with the actual statuses of the modules. The statuses of the LED indicators on the CPU module displayed in the system configuration area are the same as the actual statuses of the LED indicators on the CPU module. The LED indicators are the RUN LED indicator, the ERROR LED indicator, and the BUS FAULT LED indicator from top to bottom. The module is in a warning status. An error occurs in the module. The module is normal. The system configuration is different from the actual system configuration.

(An unknown module is installed in this slot.) The system configuration is different from the actual system configuration. (No module is installed in this slot.) The system configuration is different from the actual system configuration. (No extension rack is scanned.) 8-64