AH500 Operation Manual Relation between the operating modes and the tasks Relation between the change of the modes and the program memory 10-4 Mode Loop task Interrupt task STOP The execution of the loop task stops. The execution of the interrupt task stops. RUN The tasks which have not been executed are in the halt state. If a task is active, or the instruction TKON is executed, the task is executed. If a task is not active, or the instruction TKOFF is executed, the task is not executed. If the condition of the interrupt is met, the task is executed. Change of the mode Non-latched area Latched area STOP→RUN Whether the data is cleared or retained depends on user’s setting.
The data is retained. RUN→STOP The data is retained. The data is retained.