Delta Electronics AH500 — 11.1.2.4 Creating a Data Exchange Table (Step 3)

AH500 Operation Manual  Linked Device The users can select a slave station address which belongs to this data exchange group. The device type displayed in the Device Type box is a model name displayed in the working area in NWCONFIG. If the slave station address selected is assigned to a port of a network module, the name of the PLC to which the network module is connected will be shown in the Device Type box. If the slave station address selected is undefined, or is not involved in the PLC Link constructed, “Unknown” will be displayed in the Device Type box.

Besides, the station address assigned to the master station can not be selected, and a slave station address can belong to several data exchange groups.  Linked Status After the users select a slave station address which can be used, they can select the Disable option button, or the Enable option button in the Linked Status section.  Read The users can select a device type, type a starting address, and type a data length in the Master Parameter Setting section. They can select a device type, and type a stating address in the Slave Parameter Setting section.

Generally speaking, the device types selected in the Read section must be the same, and do not have to be the same as the device types selected in the Write section.  Write The users can select a device type, type a starting address, and type a data length in the Master Parameter Setting section. They can select a device type, and type a stating address in the Slave Parameter Setting section. Generally speaking, the device types selected in the Write section must be the same, and do not have to be the same as the device types selected in the Read section.

The data in a group of devices can be written into several different groups of devices, but the data in different groups of devices are not allowed to be stored in the same group of device. Take the figure above for example. The data in D3100~D3149 in the master station can be written into different slave stations, but D3000~D3099 in the master station can not receive the data in devices other than D2500~D2599 in the slave station whose station address is 2. Besides, the device types selected in the Read / Write section must be the same.

However, the limitation on the setting of a data exchange group varies with the master station/slave station selected or the communication parameters selected. 11-10 Related setting Description The 450 words (AH Only) option button in the Transfer Capacity Mode section is selected. Only AH500 series CPU modules allow 450-word data to be exchanged. As a result, if the 450 words (AH Only) option button in the Transfer Capacity Mode section is selected, the DVP series PLCs and the other devices can not execute a PLC Link. The users can only select M devices, D devices, or L devices in the Read/Write section. The device types selected in the Read/Write section do not have to be the same.