Delta Electronics AH500 — 11.1.2.4 Creating a Data Exchange Table (Step 3)

Chapter 11 Convenient Functions C. Consistency Between a Data Exchange Table and the Network Created in NWCONFIG The device types shown in the data exchange table in the PLC Link Table Editor window are consistent with the device names shown in the working area in NWCONFIG. Besides, if a slave station address is assigned to a port of a network module, the name of the PLC to which the network module is connected will be shown. 11-11 Related setting Description The 16 words option button in the Transfer Capacity Mode section is selected. If the master station selected is a DVP series PLC, the 16 words option button in the Transfer Capacity Mode section can be selected.

If the 16 words option button in the Transfer Capacity Mode section is selected, the starting device address in the Read/Write section will be a certain special data register, and the users can only specify a data length. The slave station selected is a user-define device. If the slave station selected is a Modbus device, the devices used will be represented by hexadecimal addresses, and the users can select word devices or bit devices. The Synchronic R/W checkbox is selected. If the 450 words (AH Only) option button is not selected, the users can only select D devices in the Read/Write section after the Synchronic R/W checkbox is selected.