Delta Electronics AH500 — 11.1.3.1 Parameters Related to a PLC Link

AH500 Operation Manual  Completion of reading: The master station finishes reading data form a slave station  Completion of writing: The master station finishes writing data into a slave station. Additional remark: If the reading of data and the writing of data are synchronous, the related flags will be controlled in the ways described below. 3. Description of the setting of the parameters related to a PLC Link: The setting of the parameters related to a PLC Link is described below. (Suppose the master station and slave station 1 are AHCPU530-EN.) The data in the device addresses starting from D100 in slave station 1 is read into the device address starting from D9 in the master station.

The number of data read from slave station 1 is 10. The data in the device addresses starting from Y0.0 in the master station is written into the device addresses starting from Y2.0 in slave station 1. The number of written into slave station 1 is 5. The slave station type is AHCPU530-EN (16#E001). The slave station address is 16#0001. Additional remark: There are a variety of Delta PLCs. Users can construct a PLC Link by connecting AH500 series CPU modules to DVP series PLCs, and other models. Consequently, there are limitations on the devices which can be used, the data exchange which can be performed, and the number of data which can be exchanged.

11-22 Completion Completion Read error Write error of reading of writing The master station stops reading OFF OFF OFF OFF data and writing data simultaneously, or the master station is reading data and writing data simultaneously. The master station finishes reading OFF OFF ON ON data and writing data simultaneously. Timeout ON ON OFF OFF The master station can not produce ON ON OFF OFF a packet which will be sent. The data sent by a slave station can ON OFF OFF ON not be stored in the master station.

Item Reading/Writing Device code Value Start address in the master station Reading SR1404 16#0000 SR1405 16#0009 Writing SR1468 16#0000 SR1469 16#A000 Start address in slave station 1 Reading SR1532 16#0000 SR1533 16#0064 Writing SR1596 16#0000 SR1597 16#A020 Number of data read Reading SR1660 16#000A from slave station 1 Number of data Writing SR1692 16#0005 written into slave station 1 Slave station type Reading SR1724 16#E001 Writing Slave station address Reading SR1756 16#0001 Writing Device type Reading SR1340 16#0000 Writing SR1372 16#0001