Delta Electronics AH500 — 11.2.2.6 Downloading the Parameters Related to an Ether Link

AH500 Operation Manual  Method 2 Select a data demanding node, right-click the data demanding node, and click Download (Single PLC) on the context menu.  Multiple nodes The data demanding setting related to all the nodes, and the start modes of all the nodes are downloaded. Before the users download the related parameters, they have to make sure that all the PLCs and all the modules are connected to an Ethernet network, and can connect to NWCONFIG through Ethernet. The connection type that the driver selected in the Driver Name drop-down list box in the Select a Driver window uses must be Ethernet, otherwise the related parameters can not be downloaded.

Please refer to section 16.1.3 for more information.  Method 1 Click the PLC menu, point to Transfer , and click Download (Multiple PLCs) . The users can also download the related parameters by clicking on the toolbar.  Method 2 Select All Nodes on the node list, right-click All Nodes , and click Download (Multiple PLCs) on the context menu. 11-46