Chapter 11 Convenient Functions Additional remark If the parameters set include a node which does not demand any data, the node will not demand any data through the network specified after the parameters are downloaded to multiple nodes. The node does not demand any data. 11.2.2.7 Uploading the Parameters Related to an Ether Link Users can upload the parameters related to an Ether Link in a PLC. Single node Only the parameters related to an Ether Link in the node selected are uploaded. Before the users upload the related parameters in a PLC, they have to make sure that the system connects to the PLC normally, and they have completed the communication setting in NWCONFIG.
Please refer to section 16.1.3 for more information. Method 1 on the toolbar. The users can also download the related parameters by selecting a data demanding node, clicking the PLC menu, pointing to Transfer , and clicking Upload (Single PLC) . Select a data demanding node, and then click Method 2 Select a data demanding node, right-click the data demanding node, and click Upload (Single PLC) on the context menu. Multiple nodes 11-47