AH500 Operation Manual be downloaded. After the users click in the upper left corner of the PLC Parameter Setting window, parameters in the PLC used will be uploaded. After the users select the Data Exchange-COM checkbox, and click OK in the Transfer Setup window, the parameters related to the Data Exchange-COM checkbox will be downloaded or uploaded, including the parameters related to the data exchange set in the previous section. 11.3.1.4 MODBUS Data Exchange – Special Auxiliary Relays 11-64 Device Name R/W Description SM1424 COM1 is exchanging data with slave 1 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 1.
SM1425 COM1 is exchanging data with slave 2 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 2. SM1426 COM1 is exchanging data with slave 3 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 3. SM1427 COM1 is exchanging data with slave 4 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 4. SM1428 COM1 is exchanging data with slave 5 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 5. SM1429 COM1 is exchanging data with slave 6 by Modbus. R ON:
when the Modbus connection is enabled and the master accesses data from slave 6. SM1430 COM1 is exchanging data with slave 7 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 7. SM1431 COM1 is exchanging data with slave 8 by Modbus. R ON: when the Modbus connection is enabled and the Device Name R/W Description